Wave tank and bench-top control testing of a wave energy converter

An increasing number of experiments are being conducted to study the design and performance of wave energy converters. Often in these tests, a real-time realization of prospective control algorithms is applied in order to assess and optimize energy absorption as well as other factors. This paper details the design and execution of an experiment for evaluating the capability of a model-scale WEC to execute basic control algorithms. Model-scale hardware, system, and experimental design are considered, with a focus on providing an experimental setup capable of meeting the dynamic requirements of a control system. To more efficiently execute such tests, a dry bench testing method is proposed and utilized to allow for controller tuning and to give an initial assessment of controller performance; this is followed by wave tank testing. The trends from the dry bench test and wave tank test results show good agreement with theory and confirm the ability of a relatively simple feedback controller to substantially improve energy absorption. Additionally, the dry bench testing approach is shown to be an effective and efficient means of designing and testing both controllers and actuator systems for wave energy converters.     

Single star scidar: atmospheric parameters profiling using the simulated annealing algorithm

In this paper, we present a new method to estimate, for each turbulent layer labelled i , the horizontal wind speed   v ( h _i )  , the standard deviation of the horizontal wind speed fluctuations  σ _v ( h_i )  and the integrated value of   C ² _n   over the thickness  Δ h_i   of the turbulent layer   C ² _n ( h_i )Δ h_i   , where   h_i   is the altitude of the turbulent layer. These parameters are extracted from single star scintillation spatiotemporal cross-correlation functions of atmospheric speckles obtained within the generalized mode. This method is based on the simulated annealing algorithm to find the optimal solution required to solve the problem. Astrophysics parameters for adaptive optics are also calculated using   C ² _n ( h_i )  and   v ( h_i )  values. The results of other techniques support this new method.     

Minimal Energy and Gravitation

Quantum theory in Robertson – Walker spacetime suggests the existence of a minimal energy ε of the order of 10⁻⁴⁵ erg. Reasonable forms for ε give the expansion factor R=R(t)(t= the cosmic time) with no need of gravitational field equations.Einstein's theory should be modified in gravitational fields of strength less than ε c/ħ ∼ 10⁻⁸ cm/s² where c is the speed of light and ħ is the reduced Planck constant. The cosmological term λ is expected to decrease as the universe expands.In the Appendix, ε is derived from a big bang – big crunch Newtonian cosmology.     

Damage identification method using harmonic excitation force considering both modelling and measurement errors

A method of structural damage identification using harmonic excitation force is presented. It considers the effects of both measurement and modelling errors in the baseline finite element model. Damage that accompanies changes in structural parameters can be estimated for a damaged structure from the change between measured vibration responses and ones calculated from the analytical model of the intact structure. In practice, modelling errors exist in the analytical model due to material and geometric uncertainties and a reduction in the degrees of freedom as well as measurement errors, making identification difficult. To surmount these problems, bootstrap hypothesis testing, which enables statistical judgment without information about these errors, was introduced. The method was validated by numerical simulation using a three‐dimensional frame structure and real vibration data for a three‐storey steel frame structure. Copyright © 2005 John Wiley & Sons, Ltd.     

The first World Atlas of the artificial night sky brightness

We present the first World Atlas of the zenith artificial night sky brightness at sea level. Based on radiance-calibrated high-resolution DMSP satellite data and on accurate modelling of light propagation in the atmosphere, it provides a nearly global picture of how mankind is proceeding to envelop itself in a luminous fog. Comparing the Atlas with the United States Department of Energy (DOE) population density data base, we determined the fraction of population who are living under a sky of given brightness. About two-thirds of the World population and 99 per cent of the population in the United States (excluding Alaska and Hawaii) and European Union live in areas where the night sky is above the threshold set for polluted status. Assuming average eye functionality, about one-fifth of the World population, more than two-thirds of the United States population and more than one half of the European Union population have already lost naked eye visibility of the Milky Way. Finally, about one-tenth of the World population, more than 40 per cent of the United States population and one sixth of the European Union population no longer view the heavens with the eye adapted to night vision, because of the sky brightness.     

大地构造和海陆起源的内波假说（Ⅱ）──建立假说的大地构造学与运动学基础

介绍建立大地构造内波假说的根据，即：（１）全球海陆分布的低阶球谐特征；（２）全球大洋中脊体系的存在；（３）大陆永存及生长的事实；（４）地壳均衡及莫霍面的化学分界面性质；（５）地槽活动的现象、规律等。在分析以在事实的基础上，研究了大地构造运动中主要的物质运动过程，认为从薄地壳底部向厚地壳底部迁移的地壳物质流，引起地壳厚度的自激波动，推动地槽运动和大陆生长。     

Sample Disturbance in Soft and Sensitive Clays: Analysis and Assessment

Despite the sophisticated methods employed to obtain high quality samples, they are prone to disturbance, due to stress release, let apart, due to sampling tools and techniques adopted. Critical reappraisal of different methods suggest that any method of sample quality assessment involving strength and deformation parameters would enable easier implementation and correct other engineering parameters for estimated sample disturbance. In this technical paper, sample disturbance index, using merely the slopes of compression paths, (representing mechanical response), in the pre- and post-yield stress regimes under odeometric loading conditions is proposed. This method is based on single oedometer test results on samples of unknown degrees of disturbance during sampling and handling. The unique feature of this approach is that the ideal rigid plastic material behavior is taken as reference. This eliminates the need for any additional experimental data or any calculations from the relationships formulated with any set of assumptions.